Jestersix

Monzer's tank restart

sfsuphysics said:
I would go to a third party to check that calcium rather than knee jerk "Triton must be right", someone in the area with an old school calcium test kit, or perhaps a store can test?
Click to expand...

For sure. Will head to Neptune’s tonight and see if I can get my water tested there or get another test kit.


Sent from my iPhone using Tapatalk
 
Salifert always seemed accurate to me, but the reagent #2(the powder one) always seemed to get kinda damp to me. I've gone to Red Sea and the accuracy seems similar to me, but the powder stays dry a little better I think.
 
Man what crazy two weeks

After conducting so many different tests, it’s official... my Hana testers are way off. I’ve been assuming I had the correct parameters all this time but was far from it.

Ended up replacing all my test kits with salifert’s. So far consistent with Neptun’s and a couple of other friends.

But that was not the big issue or shall I say issues... as they say when it rains it pours.

First, one of my MP60’s lost grip and cracked its casing. Sent it for repair a week and half ago and finally got it today.

Second, I was attending to my calcium reactor and noticed the circulating pump was not pumping. Got a new pump and as I was installing, the manifold cracked like graham crackers. I been wanting to upgrade my reactor but was not expecting to do it. Well... ended up pulling the trigger on an reef octopus 200 Calcium rector.

Now that things have settled down a bit for the past week... things are looking really good.
Ca is now 430
Alk is now 9.5
Po4 is .15ish
No3 is .2

Here are some pics:
ea0d1105ec45ae772a9006e21274151c.jpg


643fb270461232438c37ba0f40bde251.jpg


666e93192fdf50b7a77c835b1a710ffa.jpg


90fc19755551b01ae691925c7f043195.jpg


2b7456e83152ba6873062da646389a9c.jpg


c33858d8197061e86bd649f85bcced71.jpg


981cca6734fcbb7af53110b6ee6bc29a.jpg
 
scuba71 said:
Man what crazy two weeks

After conducting so many different tests, it’s official... my Hana testers are way off. I’ve been assuming I had the correct parameters all this time but was far from it.

Ended up replacing all my test kits with salifert’s. So far consistent with Neptun’s and a couple of other friends.

But that was not the big issue or shall I say issues... as they say when it rains it pours.

First, one of my MP60’s lost grip and cracked its casing. Sent it for repair a week and half ago and finally got it today.

Second, I was attending to my calcium reactor and noticed the circulating pump was not pumping. Got a new pump and as I was installing, the manifold cracked like graham crackers. I been wanting to upgrade my reactor but was not expecting to do it. Well... ended up pulling the trigger on an reef octopus 200 Calcium rector.

Now that things have settled down a bit for the past week... things are looking really good.
Ca is now 430
Alk is now 9.5
Po4 is .15ish
No3 is .2

Here are some pics:
ea0d1105ec45ae772a9006e21274151c.jpg


643fb270461232438c37ba0f40bde251.jpg


666e93192fdf50b7a77c835b1a710ffa.jpg


90fc19755551b01ae691925c7f043195.jpg


2b7456e83152ba6873062da646389a9c.jpg


c33858d8197061e86bd649f85bcced71.jpg


981cca6734fcbb7af53110b6ee6bc29a.jpg
Click to expand...

If you want confirmation, Hanna does make a standard reference solution.

https://www.bulkreefsupply.com/hi772-11-alkalinity-dkh-calibration-check-set.html
 
scuba71 said:
Yeah I thought about that. However, it’s not only one checker, it’s all of them. All, Ca, and PO4. To be honest, I loved Hanna’s convenience. Just not sure if I can trust it anymore.
Click to expand...

Only real way to know for sure is to use a reference solution. Fauna Marin used to make a reference solution that allowed you to check your testing procedure/equipment against a solution with known values. Can't buy it anymore, at least I can't find it anymore.
 
Flagg37 said:
I’ve never (that I know of) had problems with my Hannah checkers. I’ve got the same 3 it sounds like you had. How far off were they?
Click to expand...


Mines been good too. It's almost like you didn't operate them right if all them are of by a lot. I have the reference so you can check if your checkers are actually off.


Sent from my iPhone using Tapatalk Pro
 
You must log in or register to reply here.
Back
Top