Our mission

Auto-Doser Container / Tube Holder

Really basic, but thought I'd share. Got the Bubble-Magus Auto-doser, but their Liquid Containers were expensive, plus they don't even seal, so if it knocks over, 2 parts and mag is all dumped! I just bought clear plastic containers from Target (although I was looking for the taller cylindrical ones, but most had those squeeze button vacuum lids, prob could find a screw on one, but didn't want to go shop around). Drilled a hole. Simple.

And used paper/binder clips to hold the tubing over the return area of the sump.

Just random, but here is a video on 3reef on how to make your own Autodoser with an airpump DIY Autodoser

IMG_0205-vi.jpg

IMG_0206-vi.jpg

IMG_0208-vi.jpg
 
I bought a small piece of scrap acrylic from Tap and drilled holes just bigger then the tubing in it and superglued it to the edge of my acrylic sump. Viola.
 
great idea on the containers! I would think the latch would work out better than screw on. Easier to open without tubing getting all twisted up.
 
Back
Top