LF masterflex silicone tubing 1/4 L/S 24

Discussion in 'Buy, Sell, Trade' started by Gablami, Jun 13, 2017.

  1. Gablami

    Gablami Supporting Member

    I'm close to purchasing a used masterflex pump and was wondering whether anyone had any tubing lying around. Even the tubing is expensive and I don't need 25 feet.

    Thanks, Gabe


    Sent from my iPhone using Tapatalk
     
  2. scuzy

    scuzy Supporting Member

    i have ls17 tubing

    Sent from my SM-T820 using Tapatalk
     
  3. Gablami

    Gablami Supporting Member

    I'm looking at the 7523-80 and from the same seller there are different heads available with the pump. If I get the easy load II head it says it takes the LS17. Maybe I'll get that instead. Stands to reason easy load II is better than the original.


    Sent from my iPhone using Tapatalk
     
  4. scuzy

    scuzy Supporting Member

    Ls17 tubing is what's recommended in the forums too.


    Sent from my iPhone using Tapatalk Pro
     
  5. Vhuang168

    Vhuang168 Supporting Member

    Or get an Easy Load III!

    [​IMG]


    Sent from my iPhone using Tapatalk
     
  6. Gablami

    Gablami Supporting Member

    Can't find any used easy load 3s. I guess I'll have to settle for easy load 2 for now. Just bought it. Hope I didn't get a lemon!


    Sent from my iPhone using Tapatalk
     
  7. scuzy

    scuzy Supporting Member

    Easy load 2 is fine. I have extra tubing. I bought 25 ft hahah


    Sent from my iPhone using Tapatalk Pro
     
  8. Gablami

    Gablami Supporting Member

    What media do you recommend? ARM, Reborn?


    Sent from my iPhone using Tapatalk
     
  9. Vhuang168

    Vhuang168 Supporting Member

    I use reborn.


    Sent from my iPhone using Tapatalk
     
  10. scuzy

    scuzy Supporting Member

    I'm using reborn


    Sent from my iPhone using Tapatalk Pro
     
  11. Ibn

    Ibn Supporting Member

    Ballers with their CaRx. Don't have one, but reborn between the two from past research.
     
  12. Gablami

    Gablami Supporting Member

    Alrighty reborn it is. Now I just gotta add a probe holder to the reactor and get it setup. Might start a new thread for that. Thanks for your help fellas.


    Sent from my iPhone using Tapatalk
     
  13. scuzy

    scuzy Supporting Member

    Oh have a easy load 2 head fs


    Sent from my iPhone using Tapatalk Pro
     
  14. Gablami

    Gablami Supporting Member

    How often do you exchange the tubing? Quarterly? If I knew you had a easy load 2 I coulda gotten the pump without the head.


    Sent from my iPhone using Tapatalk
     
  15. scuzy

    scuzy Supporting Member

    I do once every 6 months.


    Sent from my iPhone using Tapatalk Pro
     

Share This Page