PAR Meter and Apex

[MolaMola]

Using PAR meter. Should wait until after Apex workshop, but I have it now. Set Kessils to ON instead of AUTO so I could override time/intensity/color schedule and ramping up setting. In Fusion when I switched to AUTO it went to 100% for color and intensity. Does this mean the Kessils are at 100%, fully on?

 

[Vhuang168]

Yes. You can also unplug the cable from the lights and manually turn the knobs.

 

[MolaMola]

So I cannot know the % intensity, I guess.
Thanks for the fast info.

 

[Vhuang168]

If you want to use Fusion to adjust the intensity while you test, its not difficult to do.

Go to the wizard and click on the orange gear and select preview.

 

[NanoCrazed]

Don't forget there is a correction factor to apply to the meter readings, if you're using the club meter... it's how the apogee sensors are designed.

 

[MolaMola]

Thanks for the tips! I will look into this on the weekend and test on Monday.