Water mist on return line

Discussion in 'Equipment' started by newhobby, May 30, 2011.

  1. newhobby

    newhobby Guest


    I have my return line inside the sump with a durso pipe injecting air to avoid the gurgle noise.
    Everything is working fine and I've reduced the noise considerably.
    Now, I'd like to know if there is anything I can do to minimize the mist I get from the bubbles that explode inside the sump.
    It creates a salt spray mist that is clearly visible when I use a flashlight or turn the sump light on.
    Any ideas?
  2. tuberider

    tuberider Guest

    Try a filter sock above the waterline about 50% of the length of the sock.

Share This Page