Reef nutrition

Ashburn's 187g endgame II

Rack v3 and it sinks !

EBA488BC-7FAC-497A-8981-0F6ECBEE4530.jpeg
 
This, the acrylic heats a lot and melts as you drill it and releases nasty fumes, and you have to go slowly or it melts too much. It’s something I might tell my restless kid to go outside and drill 40 holes in a piece of acrylic except I’d worry about the fumes and the holes would not be straight. Tap plastics charges too much to drill holes though.

The buoyancy of the 3D print material would make a better mushroom/nem box though right?

variable speed drill press my friend. My old drill was one speed and had this issue. Also acrylic plastic looks nice and all but you get far better results drilling poly carbonate plastic.
 
49C898C8-52CA-473C-A6C1-834A271DE4D5.jpeg
 

Attachments

  • 465635F8-D424-461E-A1B2-32779F4CCF85.jpeg
    465635F8-D424-461E-A1B2-32779F4CCF85.jpeg
    111.3 KB · Views: 175
  • B7414D90-FBE7-4B7A-881E-28325BE59FF7.jpeg
    B7414D90-FBE7-4B7A-881E-28325BE59FF7.jpeg
    133.5 KB · Views: 157
  • CB6F5C88-20C6-41F5-B6C2-640A4580D34C.jpeg
    CB6F5C88-20C6-41F5-B6C2-640A4580D34C.jpeg
    134.4 KB · Views: 168
  • FA7B04FF-6BD4-4F81-B763-173A9D2EABED.jpeg
    FA7B04FF-6BD4-4F81-B763-173A9D2EABED.jpeg
    102.6 KB · Views: 171
  • 67285FB9-FA3A-4F90-AFCF-5357D22186C5.jpeg
    67285FB9-FA3A-4F90-AFCF-5357D22186C5.jpeg
    188.8 KB · Views: 157
  • 5135D178-BA0F-4593-B9B0-C95CFB1114A9.jpeg
    5135D178-BA0F-4593-B9B0-C95CFB1114A9.jpeg
    168 KB · Views: 157
  • F12FC5A2-12C5-478C-951D-CA3004D5935C.jpeg
    F12FC5A2-12C5-478C-951D-CA3004D5935C.jpeg
    128.1 KB · Views: 164
  • 58467C50-3EE0-4A3B-81BC-63A845BAFCB0.jpeg
    58467C50-3EE0-4A3B-81BC-63A845BAFCB0.jpeg
    146.1 KB · Views: 132
  • 40DE654C-E662-427C-81D5-9465628FB00A.jpeg
    40DE654C-E662-427C-81D5-9465628FB00A.jpeg
    129.7 KB · Views: 125
Back
Top