if you are like me with limited budget but really need the ATO to work, here's my version of DIY ato for my 30g long hosting both 90g DT and 40g breeder frag tank
This setup should only used in sump, not really ideal for DP
Water Level Sensor Float Switch $2
amazon: http://a.co/eqdpOq4
You can find the same thing on ebay.
TOM Aquarium Aqua Lifter Pump $16
http://a.co/2WXmHfT
or find it used on CL/Ebay
Airline Tubing $4.49 or free if you have extra
http://a.co/aeQu5H7
or whatever you lying around in your garage/fishroom.
Extension Cord $5 or free if you have extra
http://a.co/0zCox53
Relay with PYF08A Socket, DC 12V $8.77
http://a.co/gvuxZmZ
silicone glue
hallow tube that fits the float switch ( you can use pvc pipe if you have extra, I used my old HOB filter's extending tube.)
I will update my post with photos later and steps on how to make one.
This setup should only used in sump, not really ideal for DP
Water Level Sensor Float Switch $2
amazon: http://a.co/eqdpOq4
You can find the same thing on ebay.
TOM Aquarium Aqua Lifter Pump $16
http://a.co/2WXmHfT
or find it used on CL/Ebay
Airline Tubing $4.49 or free if you have extra
http://a.co/aeQu5H7
or whatever you lying around in your garage/fishroom.
Extension Cord $5 or free if you have extra
http://a.co/0zCox53
Relay with PYF08A Socket, DC 12V $8.77
http://a.co/gvuxZmZ
silicone glue
hallow tube that fits the float switch ( you can use pvc pipe if you have extra, I used my old HOB filter's extending tube.)
I will update my post with photos later and steps on how to make one.
Last edited: