Cali Kid Corals

Patrick's (FinalPhaze987) 200 Gallon

finalphaze987

finalphaze987

Supporting Member
BARcard
Heres a few shots of the humble beginnings of our tank...We started off with a 135 in-wall but ran into some problems with a leak after an earthquake hit us. We ran all LPS & softies before, but now that we got the water quality in check and stable were moving on to the SPS. Please excuse the mess, its all still under construction. Pictures are kinda crappy, but you get the idea. I'll post more pics as its completed.

tank003.jpg


Left side
tank004.jpg


Center
tank005.jpg


Center / Right
tank006.jpg


Right side
tank007.jpg


tank010.jpg

tank018.jpg

tank016.jpg


Specs so far are:

Lighting:
three 250w 14k SPS MH on PFO ballast
two 24w 10k T5's for the fuge

Filtration:
Custom "L" shaped sump
Fuge w/ chaeto
EuroReef Skimmer
Phosphate reactor
Midwest Denitrator

Circulation:
Dart return pump
WavySea
two Seio 1100's
two Koralia 4's

Did i miss anything?
 
Thanks Levi! I was thinking of switching over to three 10k's w/ T5 actinics but im kinda worried it might be to yellow...then again the PAR sucks on the bulbs we have right now..Any of you guys have suggestions?
 
were trying to lean more toward the sps now. most of the lps and softies were from the old setup. our nitrates would hover around 10ppm and occasionally at 5ppm and we were never able to drop it to <5 until now. A bunch of those frags in there were the ones you passed over to me! =D Thanks again Herman..
 
Thanks for the kind words....alot of the stuff, rock work and all is getting moved around..i have a few corals im going to be giving out soon to make room...were trying to have it more SPS dominated instead of mixed...The torch cant really have anything near it so that anlong with the anemone have this death ring where we cant place anything..ill post some updated pics soon...were planning on stocking up heavy on more pieces..just waiting for my paycheck and approval from my "CFO/CPA" (girlfriend)...Im still trying to figure out a way to convince her that we should buy a bubble master skimmer.. =D
 
I havnt updated this in a while, but just thought id post some new pics....we just finished off the stand, cleaning most of the exterior up...i know, i know, theres doors everywhere, but i wanted access to everything just incase..The screen and keyboard on the right side are there for the aqua controller...were setting up a pc down below to run the thing..

dslr1063.jpg

dslr1064.jpg

dslr1065.jpg


I think this sucker's finally broken in! It was a tight fit, but we got it to work..Its pulling out some thick crud daily...This is one days worth of skimmate..
dslr1066.jpg
 
You must log in or register to reply here.
Back
Top