I have a bunch of 3d projects but i don't have a printer nor the knowledge. I have no time or interest to get my own printer, thus reaching out to the folks here if anyone willing to help. I'll pay for the work and material (assuming its not exorbitant) , so I'm not asking for free.
This is the list of items:
1. 4x Filter cup 2.46 inch diameter, 2.66inch lip, 5" deep.
2. 1x Waterbox Media Basket (actual dimension on the space, i think we need slightly smaller dimension to allow for expansion) 5.92Wx4.71Dx14H. See picture. Basic 3 fix shelf is good enough.
3. 1x Fluval Media Basket Chamber 1 3D model here --> https://www.thingiverse.com/thing:3770269
4. 1x Fluval Media Basket Chamber 2 3D model here --> https://www.thingiverse.com/thing:3465980
5. 1x Fluval plug https://www.thingiverse.com/thing:2863195
I'm cover all material cost. Let me know what is reasonable $$ for the work.
Let me know
This is the list of items:
1. 4x Filter cup 2.46 inch diameter, 2.66inch lip, 5" deep.
2. 1x Waterbox Media Basket (actual dimension on the space, i think we need slightly smaller dimension to allow for expansion) 5.92Wx4.71Dx14H. See picture. Basic 3 fix shelf is good enough.
3. 1x Fluval Media Basket Chamber 1 3D model here --> https://www.thingiverse.com/thing:3770269
4. 1x Fluval Media Basket Chamber 2 3D model here --> https://www.thingiverse.com/thing:3465980
5. 1x Fluval plug https://www.thingiverse.com/thing:2863195
I'm cover all material cost. Let me know what is reasonable $$ for the work.
Let me know