Coral reefer
Past President
What’s with the corners? Is it holding a lid on or something? What are they made of?
Corner holds a piece flat glass at top, so to keep the humidity stable in the tank, it’s made of 3D printed ABSWhat’s with the corners? Is it holding a lid on or something? What are they made of?
That is a good wife.Time and cost. I work two jobs now that I was ready to quit the hobby until my wife suggested to get a smaller tank instead.
True. Mine “suggested” no tankThat is a good wife.
G
These mini fridges work extremely well but I found that they don't last very long. I usually have to replace mine every 1-1.5yrs as it stops working.Will that thing even work in the summer keeping it cool?
These mini fridges work extremely well but I found that they don't last very long. I usually have to replace mine every 1-1.5yrs as it stops working.
I have an extra skimmer cup for this hang on filter that might fit yours. A few extra parts as well. If they fit and you want them, drop by sometime and grab them.Skimmer dialed in, I had to hack it so it won’t go crazy with foams, and ofc hook it up to co2 scrubber.
View attachment 43656
View attachment 43657
I have an extra skimmer cup for this hang on filter that might fit yours. A few extra parts as well. If they fit and you want them, drop by sometime and grab them.
I'm an idiot. All the years I had Tunze pumps I never realized the outside magnets were waterproof. The way you have them hides so much!Using two tunze pumps pointing flows toward bottom rear, so water gets pushed toward front. View attachment 43768
It is 3.5 x almost 2 3/4" at the widest part of the flared base.Is it 3.5x2.5? If it’s I will come right over when I have the time