Julius Chen
Guest
Does booster pump improve purity of rodi water?
I reuse waste water, so do not really care improvement in rodi to waste water ratio.
I reuse waste water, so do not really care improvement in rodi to waste water ratio.
Your good water will have higher TDs sincere you STE pushing it beyond the recommended 4:1
Sent from my iPhone using Tapatalk Pro
So weird. I get 0 TDS with only a pressure of 25. Wonder why?
Think of it this way if you are pushing higher pressure water through a membrane rated at 98% for 4:1 ratio now you are pushing more water through you will have more break through correct? The membrane couldn't filter as well.So weird. I get 0 TDS with only a pressure of 25. Wonder why?
So weird. I get 0 TDS with only a pressure of 25. Wonder why?
Broken TDS meter? Broken pressure gauge? Pressure taken at place in house where it's artificially restricted? Very low TDS to start with?So weird. I get 0 TDS with only a pressure of 25. Wonder why?
Broken TDS meter? Broken pressure gauge? Pressure taken at place in house where it's artificially restricted? Very low TDS to start with?
The video Vincent posted basically shows you that the specs of RO membranes (99% rejection) is at certain operating parameters that are well beyond what, but if you had sub 50 TDS from the tap, it's not terribly surprising to get a reading of "0"