There are plenty of online resources available that describe in detail the programming of a BRS doser with Apex:
For example:
https://forum.neptunesystems.com/showthread.php?1815-BRS-dosing
http://www.reefcentral.com/forums/showthread.php?t=2090734
Perhaps it'd be better to let us know exactly what you're trying to do (dosing amount, frequency, etc.) and maybe show us what you have tried so far if it's not working the way you want.
You are only bumping 1 dkh should be fine to do it all at once. Then dose to maintain it.
Sent from my iPhone using Tapatalk Pro
That is good advice for standard dosing..... I was planning to dose equal amounts of Calcium suggested by Randy Holmes until things level out. ...
That is good advice for standard dosing.
But if you are doing a one time large does to fix Alk, that may push calcium up very high if it is already OK.
The golden rule : Never dose what you have not checked!
Ok. Raise both!My calcium is at 310 and Alk at 6.01 dkh
Magnesium in the 1250 range
Sent from my iPhone using Tapatalk
Ok. Raise both!
You can do it pretty quickly. When I manually dose into the tank I do them right after the other. If you want to be safe then wait 10 mins.So just to clarify. When i dose the 20 ml Alk. How much longer do i wait to dose the 20 ml Cal ?
Sent from my iPhone using Tapatalk