Hope I'm posting this in the right place. I've recently decided to try the Zeovit system and had a question about flow rate to the reactor if anyone has experience with it or knows. I know I should have around 180 gph of flow to the reactor, the problem I'm having or I guess question I have, Is whether the flow should be measure prior to entering the reactor or as it exits the reactor and enters my sump.
The problem I'm running into is i'm using a Sicce Synrca 1.0 to feed the reactor and even at it's max setting, which is around 250 gph, im only getting around 60 gph into my sump.
The problem I'm running into is i'm using a Sicce Synrca 1.0 to feed the reactor and even at it's max setting, which is around 250 gph, im only getting around 60 gph into my sump.