The original 10 gallon tank is too small for all of the Rock Flower babies....so it's time to upgrade! Picked up a 20 gallon long and am in the process of figuring out the layout for the AIO sump area. I have come up with two options and wanted to get opinions as what is better or if it matters at all. The major difference has to do with the upper right side for the overflow weirs. Should the weirs continue thru the top of the Acrylic sheet or should I leave solid piece at the top for rigidity?
I created a small 1/2 shelf that the pump will sit on so that I can move the heater from the display of the current setup into the back where it can lay flat(finnex manual says it is better if it lays horizontal rather than vertical) I will leave space so I can easily remove the heater when necessary
I created a small 1/2 shelf that the pump will sit on so that I can move the heater from the display of the current setup into the back where it can lay flat(finnex manual says it is better if it lays horizontal rather than vertical) I will leave space so I can easily remove the heater when necessary