Kessil

Dremel Tool

With eye protection I have cut the rock or rubble the zoanthid is attached to, then I broke the rock through with a screw driver twisting it in the cut, leaving the coral connecting the two pieces, and then I sliced the coral with a box cutter or razor. Cut with the dremel from the back side. If the rock is too thick then using a band saw to make cut to then break the rock would work. I wouldn't cut the animal with the dremel or saw.

Can you show a photograph of what you are trying to cut?
 
I would use bone cutter on rocks. dremel is good for cutting plugs but for zoas specifically on plugs i just scrape them off with a razor( I use ceramic plugs I wouldn't recommend scraping on a rubble plug). If you decide dremel is the way to go, go from the underside then when you get near the flesh use a razor to cut the flesh then snap the plug/rock. Try to avoid flesh-to-dremel contact as much as possible the friction will heat up the coral and basically cook it.
 
Back
Top