68 Gallon System
Intro
Alright, nobody's in line for this one. I'm actually putting this one up! Water and everything! I just tore down my 32 gallon tank (put it in a 40g breeder turned into a prop tank) and the new tank is now being moved into place (after the GFCIs are put in). Check this thread for updates! I'll probably need help along the way too from you guys =) Thanks for looking!
Specs:
Display Tank
Dimensions: 36" x 20" x 22"
Material: 1" Thick Polycast Acrylic
Design: Braceless / Trimless with external overflow
Detail: Rounded front corners, polished lip, black back
Stand
Dimensions: 36" x 22" x 36"
Material: Oak
Design: Tall, cherry stain, double overlay doors, open back
Detail: Regular mouldings
Sump
Dimensions: 24" x 20" x 16"
Material: 1/2" Plexi-G acrylic
Design: Eurobraced with 24" x 7" x 16" built in fuge, skimmer chamber with chiller bulkheads, probe holders, bubble trap, return chamber.
Flow/Plumbing
Return: Quiet One 4000 (~700gph after headloss) to two outlets
Flow: 2x Tunze 6025, 2x Tunze 6045
Drain: 2x 1.5" drains with stockman standpipes
Lighting
Hanging Pendant: Maristar 250watt HQI w/ 14k Pheonix, 2x 34watt T5 actinic
Moonlights: Current USA White Moonlights (x4)
Fuge Light: undecided
Filtration
Skimmer: Tunze 9010 skimmer
Filter: Tunze Nano Filter w/ RowaPhos and RowaCarbon
NNR (Natural Nitrate Reduction): Remote 4 gallon deep sand bed
Supplements
Ca System: Aquatic Systems Design custom calcium reactor system w/ eheim recirc pump, maxijet 400 feed pump, and 2.5lb tank
Food/Etc: Probidio (possibly), DT Phytoplankton
Temperature
Heater: 2x 150watt Eheim Jager Heaters
Chiller: 1/6 HP AquaLogic Heater
Fans: Medium sized desk fan
Controllers
Main: Neptune Systems AquaController III
Outlets: Two DC8's, on two separate GFCI's
ATO: ReefFanatic Level Controller for topping off
Stocking / Design
Fuge: Possible SW Planted setup w/ Macro, sea grass, etc., otherwise eggcrate and chaeto ball
Display: 70 lbs of live rock (reeferrocks and marcorocks base rock combo), barebottom or short sand bed
Fish: Ocellaris pair, Genicanthus Bellus Female, chalk basslets, and whatever else I find
Coral: SPS and Zoos
Status
01.16.07: Broke down the 32g and moved it out of the way. I will be installing GFCI's and then hanging the pendant. After that's done, it should all be a matter of plumbing it all up. I also have the base rock laid out, I need to epoxy them into bigger pieces so they don't fall down against the glass.
01.10.07: Almost all equipment has arrived. Waiting on powerhead decision and the ca reactor to arrive.
12.06.06: Tank arrived! Now collecting equipment
Intro
Alright, nobody's in line for this one. I'm actually putting this one up! Water and everything! I just tore down my 32 gallon tank (put it in a 40g breeder turned into a prop tank) and the new tank is now being moved into place (after the GFCIs are put in). Check this thread for updates! I'll probably need help along the way too from you guys =) Thanks for looking!
Specs:
Display Tank
Dimensions: 36" x 20" x 22"
Material: 1" Thick Polycast Acrylic
Design: Braceless / Trimless with external overflow
Detail: Rounded front corners, polished lip, black back
Stand
Dimensions: 36" x 22" x 36"
Material: Oak
Design: Tall, cherry stain, double overlay doors, open back
Detail: Regular mouldings
Sump
Dimensions: 24" x 20" x 16"
Material: 1/2" Plexi-G acrylic
Design: Eurobraced with 24" x 7" x 16" built in fuge, skimmer chamber with chiller bulkheads, probe holders, bubble trap, return chamber.
Flow/Plumbing
Return: Quiet One 4000 (~700gph after headloss) to two outlets
Flow: 2x Tunze 6025, 2x Tunze 6045
Drain: 2x 1.5" drains with stockman standpipes
Lighting
Hanging Pendant: Maristar 250watt HQI w/ 14k Pheonix, 2x 34watt T5 actinic
Moonlights: Current USA White Moonlights (x4)
Fuge Light: undecided
Filtration
Skimmer: Tunze 9010 skimmer
Filter: Tunze Nano Filter w/ RowaPhos and RowaCarbon
NNR (Natural Nitrate Reduction): Remote 4 gallon deep sand bed
Supplements
Ca System: Aquatic Systems Design custom calcium reactor system w/ eheim recirc pump, maxijet 400 feed pump, and 2.5lb tank
Food/Etc: Probidio (possibly), DT Phytoplankton
Temperature
Heater: 2x 150watt Eheim Jager Heaters
Chiller: 1/6 HP AquaLogic Heater
Fans: Medium sized desk fan
Controllers
Main: Neptune Systems AquaController III
Outlets: Two DC8's, on two separate GFCI's
ATO: ReefFanatic Level Controller for topping off
Stocking / Design
Fuge: Possible SW Planted setup w/ Macro, sea grass, etc., otherwise eggcrate and chaeto ball
Display: 70 lbs of live rock (reeferrocks and marcorocks base rock combo), barebottom or short sand bed
Fish: Ocellaris pair, Genicanthus Bellus Female, chalk basslets, and whatever else I find
Coral: SPS and Zoos
Status
01.16.07: Broke down the 32g and moved it out of the way. I will be installing GFCI's and then hanging the pendant. After that's done, it should all be a matter of plumbing it all up. I also have the base rock laid out, I need to epoxy them into bigger pieces so they don't fall down against the glass.
01.10.07: Almost all equipment has arrived. Waiting on powerhead decision and the ca reactor to arrive.
12.06.06: Tank arrived! Now collecting equipment